allsnsrank
회원가입

트랙터 작업 전 반드시 거쳐야 할 연결의 기술 The Connection Technology That Must Be Performed Before Tractor Operation

Justified Crafts
구독자 3.8만명
조회수 140,580회 · 좋아요 86 · 참여율 0.06% · 숏폼 · 2026-10-10 📊 채널 정보 보기 ▶ 유튜브

지금 보고 있는 영상

트랙터 작업 전 반드시 거쳐야 할 연결의 기술 The Connection Technology That Must Be Performed Before Tractor Operation
조회수 140,580
영상 설명 · 눌러서 펼치기
@@ 1. 작업 개요
본 영상은 농업용 트랙터 후방의 동력출력축(PTO)과 부착 작업기를 연결하기 위해 구동 샤프트를 정밀하게 맞추고 체결하는 장비 결합 작업을 다룹니다.

@@ 2. 사용 재료 및 장비
- 농업용 트랙터 및 후방 링크 구조물
- 동력 전달용 PTO 샤프트 (조인트 및 슬라이딩 축)
- 작업용 안전장갑 및 보호구
- 시공 현장 농경지 주변

@@ 3. 시공 절차
1. 트랙터 후방의 동력출력축과 작업기의 연결부를 깨끗이 정돈하고 위치를 확인합니다.
2. PTO 샤프트의 양쪽 슬라이딩 축과 홈을 트랙터 및 작업기 커넥터에 각각 맞춥니다.
3. 잠금 핀이나 버튼을 조작하면서 샤프트를 안쪽으로 밀어 넣어 완전히 맞물리도록 합니다.
4. 결합부가 단단히 고정되었는지 손으로 당겨 유격을 확인하고 안전 체인을 점검합니다.
5. 장비의 정상 작동 여부를 최종 테스트한 뒤 현장 작업을 시작합니다.

@@ 4. 작업의 중요성
트랙터의 엔진 동력을 작업기로 안전하고 손실 없이 전달하기 위한 필수적인 전단계로, 정확한 결합이 이루어지지 않을 경우 장비 파손이나 안전사고로 이어질 수 있으므로 정밀성이 요구됩니다.

@@ 5. 가이드라인 준수 및 교육적 목적 (필수)
본 영상은 농업 현장에서 이루어지는 트랙터와 작업기 간의 동력 전달 장치 결합 공정과 안전한 조작 원리를 시청자에게 교육하고 전달하기 위한 목적으로 제작되었습니다. 본 영상은 안전 수칙을 준수하며 통제된 환경 하에 촬영된 교육적 및 기술적 기록 콘텐츠입니다.

@@ 1. Work Overview
This video covers the equipment coupling work of precisely aligning and fastening the drive shaft to connect the power take-off (PTO) at the rear of an agricultural tractor and the attached implement.

@@ 2. Materials and Equipment Used
- Agricultural tractor and rear linkage structure
- PTO shaft for power transmission (joints and sliding shaft)
- Work safety gloves and protective gear
- Farmland surrounding the construction site

@@ 3. Construction Procedure
1. Clean and check the positions of the power output shaft at the rear of the tractor and the connection part of the implement.
2. Match the sliding shafts and grooves on both sides of the PTO shaft to the tractor and implement connectors, respectively.
3. Push the shaft inward while operating the locking pin or button to ensure complete engagement.
4. Pull the connection part by hand to check for play and ensure it is firmly fixed, and inspect the safety chain.
5. Finally test whether the equipment operates normally before starting field work.

@@ 4. Importance of the Work
This is an essential preliminary step to safely and losslessly transmit the tractor's engine power to the implement. Precision is required because incorrect coupling can lead to equipment damage or safety accidents.

@@ 5. Guideline Compliance and Educational Purpose (Mandatory)
This video is produced for the purpose of educating and conveying the power transmission coupling process and safe operation principles between tractors and implements performed in agricultural sites to viewers. This video is educational and technical documentary content filmed under controlled conditions in compliance with safety regulations.